Machine park
MAZAK SUPER QUICKTURN 28M
This is our longest machine and is equipped with unusually stable and robust milling heads. It also has hydraulic support dock and stud dock.
| Max diameter | 400mm |
| Max length | 1700mm (outside chuck to stud dolly) |
| Feedthrough in chuck | 75mm |
| C-Axel | Yes |
| Y-Axel | No |
| Number of tools | 12st |
| Powered tools | Yes |
MAZAK MULTIPLEX 620
In this machine we run jobs with many details as this machine can turn both sides of the detail at the same time and thus reduce the processing time significantly.
| Max diameter | 210mm |
| Max length | 300mm (outside chuck) |
| Feedthrough in chuck | 52mm |
| C-Axel | Yes |
| Y-Axel | No |
| Number of tools | 24 pcs (12 on each side) |
| Powered tools | Yes |
MAZAK SLANTTURN 30 ATC
This is our "big" machine where we do the heavier jobs and is therefore equipped with a crane for putting up and taking down blanks.
| Max diameter | 460mm |
| Max length | 1000mm (outside chuck to stud dolly) |
| Feedthrough in chuck | 65mm |
| C-Axel | YES (1 degree indexing) |
| Y-Axel | No |
| Number of tools | 128pcs (16 simultaneous in the tool revolver) |
| Powered tools | Yes |
MAZAK QUICKTURN 10 ATC
This machine is mostly fully loaded for production for one of our customers, but sometimes it happens that it gets set up for other jobs as it is a very competent machine.
| Max diameter | 254mm |
| Max length | 500mm (outside chuck to stud dolly) |
| Feedthrough in chuck | 45mm |
| C-Axel | Yes |
| Y-Axel | No |
| Number of tools | 16pcs (With unusually low risk of interference) |
| Powered tools | Yes |